



































EGR/DPF Delete 2011-2016 LML 6.6L Duramax All-in-One Kit
---tab Description---

Combining an EGR delete with a DPF delete comprehensively optimizes your 2011-2016 LML 6.6L Duramax diesel engine performance by eliminating two major restrictive emissions systems. This modification significantly improves power, efficiency, and engine longevity while reducing maintenance needs.
LML EGR&DPF Delete Kit Key Features
Power Increase
- Removes exhaust backpressure from DPF, allowing turbo to spool faster
- Eliminates EGR’s recirculated hot gases, reducing intake air temperatures
- Typical gains: 15-30% more horsepower/torque (varies by tune)
Improved Engine Health
- Prevents EGR soot buildup in intake manifold and valves
- Stops DPF-related regen cycles that dilute engine oil with fuel
- Reduces carbon deposits in combustion chambers
Enhanced Fuel Economy
- No DPF regens wasting fuel (up to 2-3 MPG improvement)
- Cleaner combustion without EGR’s oxygen-depleted air
Simplified Maintenance
- Eliminates DPF filter replacements ($1,000+ savings)
- No EGR valve/cooler failures to repair
- Reduces oil change frequency (no soot contamination)
Thermal Management
- Lower EGTs (exhaust gas temps) without EGR’s hot gas reintroduction
- Reduced risk of turbo overheating during heavy loads
Specification
| Exhaust Material | T-409 Stainless Steel, it is magnetic. |
| Thickness | 2mm thick for long-lasting durability and heat resistance. |
| Inlet Diameter | 4.0"/5.0‘’ |
| mandrel-bent construction | Maximum flow efficiency, helping your diesel breathe easier |
Installation
2011-2016 LML 6.6L Duramax EGR Delete Instruction
2011-2016 LML 6.6L Duramax DPF Delete Instruction
Tuner Required for Installation
Installing a LML 6.6L Duramx delete pipe requires more than just swapping out hardware. When removing of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting. Looking for a complete LML delete solution? Check out our full LML Delete Kit here.
---tab How to Choose---
How to Choose DPF Delete?
4” vs 5” Straight Pipe Comparison
When choosing a LML 6.6L Duramx delete pipe, the most common options are 4-inch and 5-inch straight pipes. The 4-inch straight pipe delivers a tighter, raspier exhaust note—especially noticeable at lower RPMs—making it ideal for daily driving or mildly tuned setups where excessive drone is undesirable. In contrast, the 5 inch straight pipe LML 6.6L Duramx offers a deeper, more refined tone with less high-pitch resonance. It excels in high-output builds and towing scenarios, where increased exhaust flow is beneficial.
Driver feedback suggests:
- 4”straight pipe is great for stock-to-lightly-modded trucks and a quieter cabin
- 5” straight pipe is perfect for aggressive builds, deeper tone lovers, or anyone maximizing exhaust performance
Different Types of DPF Delete
DPF Race Delete
- Only removes the DPF (keeps stock downpipe)
- Minimal performance gain but cheapest option
- Best for budget-focused or emissions-testing avoidance
Downpipe-Back Delete
- Replaces exhaust from the turbo downpipe backward
- Improves mid-range power and throttle response
- Good for street builds keeping stock turbo
Turbo Back Delete
- Full system replacement from turbo outlet
- Includes high-flow downpipe for maximum efficiency
- Reduces turbo lag and boosts top-end power
- Top choice for tuned/high-performance engines
Dual Exit (5" only)
- Splits into dual exhaust paths
- Enhances cooling and flow for extreme applications
- Used in heavy towing or competition setups
Muffler vs. No Muffler
With Muffler
- Tames exhaust noise for daily driving
- Slight power restriction (~5-10HP)
- More likely to comply with local noise laws
Straight Pipe (No Muffler)
- Loud, aggressive exhaust note
- Unrestricted flow for max horsepower
- Often illegal for street use (noise/emissions)
- Reserved for off-road/race applications
---tab Fitment---
- 2011-2015 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks.
- 2015.5-2016 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks.
- Does NOT fit Cab & Chassis truck.
---tab Shipping & Returns---
Fast Shipping Policy
Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy
Easy Return Policy
Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy
Original: $309.99
-65%$309.99
$108.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
---tab Description---

Combining an EGR delete with a DPF delete comprehensively optimizes your 2011-2016 LML 6.6L Duramax diesel engine performance by eliminating two major restrictive emissions systems. This modification significantly improves power, efficiency, and engine longevity while reducing maintenance needs.
LML EGR&DPF Delete Kit Key Features
Power Increase
- Removes exhaust backpressure from DPF, allowing turbo to spool faster
- Eliminates EGR’s recirculated hot gases, reducing intake air temperatures
- Typical gains: 15-30% more horsepower/torque (varies by tune)
Improved Engine Health
- Prevents EGR soot buildup in intake manifold and valves
- Stops DPF-related regen cycles that dilute engine oil with fuel
- Reduces carbon deposits in combustion chambers
Enhanced Fuel Economy
- No DPF regens wasting fuel (up to 2-3 MPG improvement)
- Cleaner combustion without EGR’s oxygen-depleted air
Simplified Maintenance
- Eliminates DPF filter replacements ($1,000+ savings)
- No EGR valve/cooler failures to repair
- Reduces oil change frequency (no soot contamination)
Thermal Management
- Lower EGTs (exhaust gas temps) without EGR’s hot gas reintroduction
- Reduced risk of turbo overheating during heavy loads
Specification
| Exhaust Material | T-409 Stainless Steel, it is magnetic. |
| Thickness | 2mm thick for long-lasting durability and heat resistance. |
| Inlet Diameter | 4.0"/5.0‘’ |
| mandrel-bent construction | Maximum flow efficiency, helping your diesel breathe easier |
Installation
2011-2016 LML 6.6L Duramax EGR Delete Instruction
2011-2016 LML 6.6L Duramax DPF Delete Instruction
Tuner Required for Installation
Installing a LML 6.6L Duramx delete pipe requires more than just swapping out hardware. When removing of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting. Looking for a complete LML delete solution? Check out our full LML Delete Kit here.
---tab How to Choose---
How to Choose DPF Delete?
4” vs 5” Straight Pipe Comparison
When choosing a LML 6.6L Duramx delete pipe, the most common options are 4-inch and 5-inch straight pipes. The 4-inch straight pipe delivers a tighter, raspier exhaust note—especially noticeable at lower RPMs—making it ideal for daily driving or mildly tuned setups where excessive drone is undesirable. In contrast, the 5 inch straight pipe LML 6.6L Duramx offers a deeper, more refined tone with less high-pitch resonance. It excels in high-output builds and towing scenarios, where increased exhaust flow is beneficial.
Driver feedback suggests:
- 4”straight pipe is great for stock-to-lightly-modded trucks and a quieter cabin
- 5” straight pipe is perfect for aggressive builds, deeper tone lovers, or anyone maximizing exhaust performance
Different Types of DPF Delete
DPF Race Delete
- Only removes the DPF (keeps stock downpipe)
- Minimal performance gain but cheapest option
- Best for budget-focused or emissions-testing avoidance
Downpipe-Back Delete
- Replaces exhaust from the turbo downpipe backward
- Improves mid-range power and throttle response
- Good for street builds keeping stock turbo
Turbo Back Delete
- Full system replacement from turbo outlet
- Includes high-flow downpipe for maximum efficiency
- Reduces turbo lag and boosts top-end power
- Top choice for tuned/high-performance engines
Dual Exit (5" only)
- Splits into dual exhaust paths
- Enhances cooling and flow for extreme applications
- Used in heavy towing or competition setups
Muffler vs. No Muffler
With Muffler
- Tames exhaust noise for daily driving
- Slight power restriction (~5-10HP)
- More likely to comply with local noise laws
Straight Pipe (No Muffler)
- Loud, aggressive exhaust note
- Unrestricted flow for max horsepower
- Often illegal for street use (noise/emissions)
- Reserved for off-road/race applications
---tab Fitment---
- 2011-2015 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks.
- 2015.5-2016 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks.
- Does NOT fit Cab & Chassis truck.
---tab Shipping & Returns---
Fast Shipping Policy
Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy
Easy Return Policy
Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy
























